Tides Marine
Manufacturer of the SureSeal Dripless ShaftSeal

Navigation Menu

  • Home Page
  • SureSeal Shaft Seals
    • SureSeals
    • Find Standard SureSeal Part #
    • Find Metric SureSeal Part #
    • SureSeal Kit Specification Table
    • FSA Specification Table
    • Replacement Lip Seals
    • Nitrile Lip Seal Table
    • Spare Seal Carrier Kits
    • Water Kits
    • Smart Seal Alarm System
    • SureSeal Comments Form
  • Series One ShaftSeals
    • Series One ShaftSeals
    • Find Standard SeriesOne Part #
    • Find Metric SeriesOne Part #
    • Series One ShaftSeal Kits
  • Rudder Bearings
    • Rudder Bearings
    • Upper Rudder Bearing STD
    • Upper Rudder Bearing LP
    • Rudder Port/Bearing Type C
    • Rudder Port/Bearing Type D
    • Rudder Port/Bearing Type E/F
    • Rudder Port/Bearing Type G/H
    • Rudder Seal Type I
    • Rudder Port/Bearing Type J
    • Rudder Port/Bearing Type K
    • Rudder Tube System
    • Replacement Lip Seals
    • Spare Rudder Seal Carriers
    • Rudder Collars
  • Fittings Hose Clamps
    • Fittings
    • Tee Fittings
    • Zero Draft FRP Tubing
    • Improved Hose Clamps
    • Articulated Hose
    • T-Bolt Clamps
  • SailTrack
    • SailTrack
    • SalTrack Hardware
    • Before Ordering
    • SailTrack Orderform
    • SailTrack Installation Instructions
    • Sail Lofts - USA
    • SailTrack Comments Form
  • Knowledge Base
    • Knowledge Base Index
    • List by Category
    • KB Login Employees Only
  • Catalog and Brochures
  • The Company
    • The Company
    • Warranty
    • ABS Lloyds Certifications
  • News and Testimonials
    • News
    • Boat Show News
    • Testimonials
  • Repair/Maintenance
    • SureSeal or StrongSeal
    • SureSeal Initial Adjustment
    • Repair and Maintenance
    • Trouble Shooting
    • Lip Seal Replacement Guide
    • Lip Seal FAQ's
    • Strong Seal Installation
    • Rudder Seal Replacement
  • Contact Us
    • Contact Us
    • USA Service Centers
    • European Service Centers
    • Pacific Rim Service Centers
  • Tallon Products
    • Tallon Products
    • Receivers
    • Holders
    • RAM Products
    • Tables-Lamps-Connectors
  • IsoFlex Products
    • IsoFlex Technologies
  • WebStore
  • Upcoming
    Boat Shows

  • IBEX 2010
    Sept 28th Thru Sept 30th
    Now in Louisville Kentucky
  • FTL. Intl. Boat Show
    Oct 28, thru Nov 1st, 2010
  • Salon Nautico Nov 15th, 2010
  • METS Nov 16th - Nov 18th, 2010
  • SeaTec 2011
    Feb 16th thru Feb 18th
  • Miami Int'l Boat Show
    & Strictly Sail 2011

Tallon Marine Products

Tallon Marine

Boat              RIB          Kayak              RV

Tallon Marine

NON-POWERED Receiver Units

Non-Powered Receivers

Can be factory or retrofitted in almost every type of boat, RV or Kayak in just minutes and has the ability to mount and swap out all commonly used powered or non-powered accessories.

Sold As: Cartons of 2 or 6 Receiver Units Complete.
316 Stainless, white or black faceplates.
For use with Alloy Connectors.

POWERED Receiver Units

Powered Receivers

Can be factory or retrofitted in almost every type of boat, RV or Kayak in just minutes and has the ability to mount and swap out all commonly used powered or non-powered accessories. Used to run a wide variety of Tallon lights, chargers, adaptors and most 12/24v powered accessories. Also accepts Tallons full range of non-powered accessories.

Sold as: Cartons of 2 Receiver Units complete.
316 Stainless, white or black faceplates.
For use with: Tallon Power or Alloy Connectors.

RIB Receiver System

Rib Receivers

Based on Tallons classic Receiver design, the back-end of the RIB Receiver is fully sealed, allowing for installation directly into the RIB or Inflatable's tube. The close resemblence to existing valve technology allows for easy factory and aftermarket installation. Ideal for mounting boarding ladders, tables, drink holders, rod holders, and dive bottle holders, etc... Supplied with a double RIB Trim for rigidity, spacing and finish.

Sold as: Cartons of 2 Receiver Units and a Double Rim Trim complete.
316 Stainless, white or black faceplates.
For use with Alloy Connectors.

Sealed Receiver Unit

Rib Receivers

Sealed version of the Classic Tallon Receiver, specifically designed to be installed into surfaces where it is important for the unit's back to be totally sealed, e.g. Kayaks, RV linings and marine cabins where the back-end of the receiver protrudes into living spaces or bathrooms. Ability to mount and swap-out the full range of Tallon's non-powered accessories.

Sold as: Cartons of 2 Receiver Units.
316 Stainless, white or black faceplates.
For use with: Alloy Connectors.

Contact us for more information on the Tallon Marine Products

Quality Marine Systems at a fair price....
it's just the beginning of the Tides Marine experience.

Back to Top

Tides Marine 3251 SW 13th Dr. Suite A Deerfield Beach, Fl 33442
Tel: (800) 420-0949 Tel: (954) 420-0949 Fax: (954) 420-0945

Copyright © 2010 Tides Marine, Inc. All Rights Reserved.