Since 1991, Tides Marine has provided essential marine components to the marine industry. At Tides, providing excellent customer service is our no. 1 priority and we proudly manufacture our Shaft Seals, Rudder Bearings and Sail Track in Deerfield Beach, Florida. Our products improve vessel performance and reliability, solve unique system issues, reduce the need for scheduled maintenance and provide worry-free, long-term boating enjoyment. We are the US Master Distributor for Aqualuma LED Lighting, MATE Pumps, Horns & Rubrail as well as Super Stainless, a gel based, non-abrasive, stainless steel cleaning agent.
Using the lettered disks, determine the width of the luff groove. Simply insert the lettered studs into the luff groove anywhere along the mast.
Select the stud which fits in the luff groove with the least amount of play side-to-side without jamming or sticking.
Once you have found the stud size that fits snugly, move the stud up the mast (within the luff groove) as far as you can reach to ensure that the luff groove width is uniform.
Next, use the numbered disks (1 through 8) to determine the lip thickness of the luff groove. Select the stud which allows the least amount of play fore-and-aft.
You can slide these numbered studs through the mast gate. Or, you can turn each stud 90°, insert it into the luff groove above or below the mast gate and turn the stud until you find the one that fits snugly.
|LIP THICKNESS||SLOT WIDTHS|